The development of cold recycling machines has been able to meet the requirements of economic development in recent years. It is impossible to build new high-grade highways in the future, so the maintenance of old pavement will become the main construction task in the future. In the even thicker pavements produced by the construction of the cold regenerator, the cold regenerator is rented, and there is no weak interface between the thinner pavements sometimes appeared in the traditional construction method. Cold regenerator leasing is loved by the majority of users because of its advantages of environmental protection and energy saving. At the same time, it can also improve construction conditions and reduce economic pressure. It is the primary choice for many small construction units.
So, what are the differences between these two different repair methods? First of all, let's briefly introduce the usual maintenance methods for you. In fact, the main purpose of normal maintenance is to keep the road construction machinery in good operation as far as possible, that is, it can enter the working state immediately once there is a need for work. From this point of view, if the cold regenerator is rented, we will find that the so-called ordinary maintenance actually focuses more on it, so it is carried out during the working gap and when the equipment is not working.
In case of an emergency, it will take a lot of time to repair according to the usual maintenance standards and procedures, which will not only seriously affect the construction progress and construction period, but also reduce the utilization rate of road construction machinery and equipment. Therefore, the objectives of cold regenerator leasing, peacetime repair and on-site emergency repair are very different.
Frankly speaking, wittgen cold regeneration, what we call ordinary repair, actually has a specific process. During normal repair, we need to ensure all functions of road construction machinery and equipment according to the established procedures. It can be restored by a series of methods such as diagnosis, positioning, isolation, repair and correction, and it is mainly completed by maintenance personnel with certain skills.
推荐阅读/ Recommended reading
- 为什么利用冷再生机施工？ 2022-09-24
- 道路上使用冷再生机有哪些优点 2022-09-23
- 冷再生机的维修与抢修什么区别 2022-09-19
- 冷再生机施工对旧沥青路面的改造是有用的 2022-09-17