After our previous introduction, I believe you know more or less about the cold regenerator. Today, let's talk about the method of spreading cement.

根据再生层的厚度和预定的再生层的密度及水泥剂量，计算每一再生料需要的水泥用量，并确定水泥摆放的纵横间距。由于水泥用量很少，为了避免被车辆轮胎的气流带走以及天气突然变化造成的水泥质量损失，水泥的撒布时间越短越好。

According to the thickness of the recycled layer, the predetermined density of the recycled layer and the cement dosage, calculate the cement dosage required for each square meter of recycled material, and determine the vertical and horizontal spacing of cement placement. Due to the small amount of cement, in order to avoid being taken away by the air flow of vehicle tires and the loss of cement quality caused by sudden changes in weather, the shorter the cement spreading time, the better.

冷再生机租赁

Lease of cold regenerator

一般来说，可根据再生机的工作宽度将再生路面划分为几幅，再生机施工前一幅时，将水泥撒布在下一幅路面上。水泥撒布完后，原路表面应没有空白位置，也没有过分集中现象。

Generally speaking, the recycled pavement can be divided into several sections according to the working width of the recycling machine. When the former section is constructed by the recycling machine, the cement will be distributed on the next section. After the cement is distributed, there shall be no blank position and excessive concentration on the original road surface.

以上就是冷再生机铺洒水泥的方法，希望对你有所帮助，欢迎来电咨询！

The above is the method of spreading cement again. I hope it will help you. Welcome to inquire!