冷再生施工和机械租赁业务
筑路架桥,奉献社会;以人为本,不断创新

服务热线

18264104888

新闻中心

首页>>新闻中心冷再生机租赁其有哪些优势

冷再生机租赁其有哪些优势

来源:http://www.tclqgc.com/ 日期:2021-09-02 发布人:
冷再生机租赁其冷再生机存在哪些优势呢?相信大多数人对冷再生机都不了解吧,下面途畅路桥为大家做简单的相关介绍。
What are the advantages of renting a cold regenerator? I believe most people don't understand the cold regenerator. Here is a brief introduction to Tuchang road and bridge.
1、施工工序简单化。作为冷再生装置的铣削刨削工作,旧的旧路面材料被铣削,在铣削和刨削中使用的废料在混合室中直接混合和扩散。简化了施工过程。
1. Simplify the construction process. As the milling and planing work of the cold regeneration device, the old pavement materials are milled, and the waste materials used in milling and planing are directly mixed and diffused in the mixing chamber. The construction process is simplified.
2、防止因道路施工而引起交通的堵塞。由于冷再生机在施工过程中省去了运输和搅拌过程,施工现场投资相对较小。这有效地减少了由于道路建设造成的交通负荷。由于冷回热器是在施工侧施工的侧马路,所以可以选择一半的施工,一半的道路维修,使道路可以修复,而不影响正常使用的交通。
2. Prevent traffic jams caused by road construction. Since the cold regenerator saves the transportation and mixing process in the construction process, the investment on the construction site is relatively small. This effectively reduces the traffic load caused by road construction. Since the cold regenerator is a side road constructed on the construction side, half of the construction and half of the road maintenance can be selected, so that the road can be repaired without affecting the traffic in normal use.
3、施工效率高。传统的路面施工工艺是先用铣刨机将废旧路面铣掉,然后将废料输送到搅拌站并混合。然后,将其运回施工现场并用摊铺机铺开,辊子由辊子卷起并形成。而局部冷回热器在施工过程中属于一种成型(也就是铣刨、拌合、摊铺在冷再生机一次通过需要修复的马路后先后完成),它可以随着施工进度的进行而打开道路竣工。它可以大大缩短维护路面和提前开放交通所需的时间。
3. High construction efficiency. The traditional pavement construction process is to mill the waste pavement with a milling machine, and then transport the waste to the mixing plant and mix it. Then, it is transported back to the construction site and spread with a paver, and the roller is rolled up and formed by the roller. The local cooling regenerator belongs to a kind of molding in the construction process (that is, milling, mixing and paving are completed successively after the cold regenerator passes through the road to be repaired at one time). It can open the road and complete the construction with the progress of construction. It can greatly shorten the time required to maintain the pavement and open the traffic in advance.
4、保护环境,节约能源和资源。由于冷再生机铣刨后,几乎所有的废料都可以直接送入拌合腔搅拌就地摊铺利用,减少了新石料等材料的开采,不需要考虑运输和堆垛的问题。废弃材料。大大节约了资源,保护了环境。冷再生机不需要在工作中加热和混合材料,节省了大量的能源。冷再生机是一种用来回收旧的废弃道路材料的设备。没有污染,所以我们称之为绿色建筑技术。
4. Protect the environment and save energy and resources. After milling by the cold recycling machine, almost all wastes can be directly sent to the mixing chamber for mixing and paving on the ground, which reduces the mining of new stone and other materials and does not need to consider the problems of transportation and stacking. Waste materials. It greatly saves resources and protects the environment. The cold regenerator does not need to heat and mix materials in operation, which saves a lot of energy. Cold recycling machine is a kind of equipment used to recycle old waste road materials. There is no pollution, so we call it green building technology.
5、降低施工成本。与传统的施工方法相比,冷再生机省去了许多设备、人员、材料等,相对成本较低
5. Reduce construction costs. Compared with the traditional construction method, the cold regenerator saves a lot of equipment, personnel and materials, and the relative cost is low
想要了解更多冷再生租赁及冷再生机的优势相关知识介绍,欢迎关注我们网站,欢迎您的来电。
If you want to know more about the advantages of cold regeneration leasing and cold regeneration machine, please pay attention to our website and welcome your call.

阅读/ Recommended reading

1. 准备工作:使用者需要对水泥撒布车进行检查和维护,确保其正常运行。包括检查机械部件是否完好,油液是否充足,车辆的操作系统是否正常等。1. Preparation work: ...

冷再生基层工程质量检测、控制及注意事项 2024-03-20
公路路面养护冷再生知识汇总 2024-03-17
公路路面养护冷再生的施工要点 2024-03-17
冷再生机的控制要点要注意什么? 2024-03-13

产品/ Recommended products