冷再生施工和机械租赁业务
筑路架桥,奉献社会;以人为本,不断创新

服务热线

18264104888

新闻中心

首页>>新闻中心冷再生机是解决道路全深度翻新有效工具!

冷再生机是解决道路全深度翻新有效工具!

来源:http://www.tclqgc.com/ 日期:2023-11-09 发布人:
冷再生机是解决道路全深度翻新和土壤稳定的,冷再生机采用自动深度控制装置。负荷控制装置,使发动机的速度被保持在峰值扭矩,以维持高的产率。四种转向模式丰富的机移动性。有三个转子的选择:粉通用转子专用沥青层;切碎的功能和转子的两个组合的稳定性;和两个专用土壤稳定转子不同的土壤类型。
The cold regeneration machine is designed to solve the problem of full depth road renovation and soil stability, and adopts an automatic depth control device. The load control device maintains the engine speed at peak torque to maintain high productivity. The four steering modes offer rich mobility. There are three options for rotors: a special asphalt layer for powder general rotors; The function of shredding and the stability of the two combinations of the rotor; Different soil types from two dedicated soil stabilization rotors.
道路冷再生工艺优势比就地冷再生技术的道路路面维修改造传统方法具有无可比拟的优势。
The advantages of road cold regeneration technology are unparalleled compared to traditional methods of road surface maintenance and renovation using on-site cold regeneration technology.
1,成本低,根据海外引入的工程信息,与旧的层压材料新的覆盖方法相比,就地冷再生能的约20%的成本降低到46%。
1. Low cost. According to the engineering information introduced overseas, compared to the new coverage method of old laminated materials, the cost of on-site cold regeneration energy is reduced from about 20% to 46%.
冷再生机租赁
2,提高老路的水平,我们可以提高基层的承载能力,改善道路,实现从根本上,这是低等级公路,特别是有特殊的含义。
2. By improving the level of old roads, we can enhance the carrying capacity of the grassroots, improve the roads, and fundamentally, this is a low-grade highway, especially with a special meaning.
3,厚度均匀的结构完整性,从而导致冷回收店内层,有有时可见之间没有淡薄接口覆盖传统的施工方法。
3. The structural integrity with uniform thickness leads to the lack of thin interfaces between the inner layers of the cold recycling store and the traditional construction methods.
4,路基无损伤,仅通过一次由于一次性冷再循环做法,在暴露的路基再生单元。与传统的施工方法,对路基的损伤较小相比。
4. The roadbed is undamaged and can only be regenerated once in the exposed roadbed due to a one-time cold recycling method. Compared with traditional construction methods, the damage to the roadbed is relatively small.
5,节约材料,所有的旧料全部帘布本地使用,从而大大降低了新材料,以保护资源量。
5. Save materials, all old materials will be used locally, greatly reducing the amount of new materials to protect resources.
6,建设周期短,因为那里是老材料的任何运输问题,旧机器和目标上没有任何其他材料碎散,不需要专门的散装物料拆除和破碎,更重要的是,一次性操作的特点施工过程大大简化了施工工艺,节省了施工时间。
6. The construction period is short because there are no transportation issues with old materials, and there are no other materials scattered on the old machines and targets. There is no need for specialized dismantling and crushing of bulk materials. More importantly, the characteristic of one-time operation greatly simplifies the construction process and saves construction time.
7,冷再生保护环境,因为使用旧物大大降低新材料的开发,没有运输和堆放旧物的问题,以符合环保要求的根本。
7. Cold regeneration protects the environment, as the use of old materials greatly reduces the development of new materials, without the problem of transportation and stacking of old materials, in order to meet the fundamental requirements of environmental protection.
本文由冷再生机租赁为您提供,我们的网站是:http://www.tclqgc.com将以全心全意的热情为您提供服务,欢迎您的访问!
This article is provided by Cold Recycling Machine Rental for you. Our website is: http://www.tclqgc.com We will provide you with wholehearted enthusiasm and welcome your visit!

推荐阅读/ Recommended reading

根据路面破损情况的不同和对修复后路面质量等级的不同要求,就地热再生技术应用的施工工艺主要有三种:整形热再生法、重铺热再生法、复拌热再生法。According to the dif...

WR2100L冷再生机转子双转速的使用特点 2024-02-10
WR2300E路面冷再生机的使用特点 2024-02-10
路面冷再生机的组成介绍 2024-02-06
沥青路面冷再生机施工需要注意的事项 2024-01-25

推荐产品/ Recommended products