For the equipment, no matter how many times the content has been repaired and replaced, as long as the external maintenance work is done well, it will not make people feel how old it is. Next, the editor of the Cold Recycling Machine Rental Company will tell you about the maintenance of cold recycling locomotive paint.
Generally speaking, the surface of the cold regenerator is often rusted. In addition to collision and scratch, which can easily lead to surface corrosion, the small stones bounced by the tire when driving hit the paint surface, which will cause peeling spots on the paint surface, and small rust spots will be produced after a long time. Because most of these small scars are in inconspicuous places, they are very easy to be ignored.
When the cold regenerator is running, it is unavoidable to encounter rain and snow weather or to pass through muddy and waterlogged roads. Sludge is easy to accumulate in some spaces such as the underbody and the floor inside the vehicle. This requires us to check the equipment frequently, and at the same time, keep the door and body drain holes unblocked, check the humidity of the cover inside the vehicle, and prevent the floor parts from rusting.
For the cold regenerator with soft paint surface, it may cause small scratches when sand particles hit the car body during high-speed driving. To prevent this, the cold regenerator leasing company believes that it can seal the car body to form a network of solid protective film and improve the paint hardness.
In addition, the chassis can be armored or sealed at the bottom of the vehicle, which can better protect the chassis from acid rain and corrosion, make the original protective layer not easy to crack and fall off, and also prevent the impact of small stones on the chassis when driving.
For the cold regenerator whose surface has been slightly scratched or rusted, if it is easy to rust, but it is not worth spending money to repair it, it is recommended that you gently smear the circle on the scratch with toothpaste, which can reduce the scratch mark, also can simply play a role of isolation and prevent rust.
The maintenance methods of cold recycled locomotive paint are shared here. If you have any doubts or needs about this, please come to our website http://www.tclqgc.com Consult and understand!
推荐阅读/ Recommended reading
- 冷再生机在压实作业中驱动系统故障解决方法 2023-09-20
- 水泥就地冷再生施工常见的问题及施工要点 2023-09-18
- 沥青路面再生技术的优势 2023-09-15
- 冷再生机租赁需要注意哪些内容？ 2023-09-11