While doing a good job in road maintenance, road construction machines should also be maintained to extend the service life of the machine. Now let's listen to the maintenance methods of the cold recycling machine rental manufacturers.
The rational use of asphalt equipment to maximize its potential is the requirement of highway mechanized construction enterprises, and maintenance and repair is the necessary prerequisite for the degree of mechanical benefits.
In the process of highway mechanized construction, many units have managed according to the principle of "paying equal attention to use and maintenance", which has changed the previous construction that only paid attention to the use of machinery and did not pay attention to mechanical maintenance. Many problems that are easy to find have been ignored. As a result, some small problems of equipment have become major problems, and some even scrapped in advance.
This not only greatly increases the cost of mechanical maintenance, but also delays the construction, and some even cause engineering quality problems. In view of this situation, we have formulated and determined the maintenance content of each shift in machinery management, and urged the implementation. At the end of each month, the asphalt equipment shall be maintained for 2-3 days, so that many faults can be eliminated before they occur.
The cold recycling machine rental manufacturer said that the residual cement concrete in the asphalt equipment should be removed after daily operation to reduce the wear of the mixing knife and extend the service life of the mixing knife; Remove the dust from all components of the whole machine, and add grease to the lubricating parts to ensure good lubrication of the lubricating parts of the whole machine, reduce the wear of wearing parts, and thus reduce the mechanical failure caused by wear.
Check all fasteners and wearing parts, and solve problems found in time, so that some faults can be eliminated before they occur, so as to prevent problems before they occur; The maintenance can be carried out every shift. The service life of asphalt equipment can be extended by 800h on average, and the mixing knife can be extended by 600h.
This is the end of our discussion about the maintenance method of the cold regenerator provided by the leasing manufacturer. If you have any ideas, please come to our website http://www.tclqgc.com Consult!
推荐阅读/ Recommended reading
- 冷再生机有许多无可比拟的优点！ 2023-01-18
- 冷再生机液压系统故障排除的分析 2023-01-16
- 浅层就地冷再生需要冷再生机怎么操作 2023-01-13
- 冷再生技术在旧路面处理方面的应用 2023-01-11