冷再生机是工地作业中常用的一种机械，可以有效的帮助施工的工人们加快工作效率和提高工程质量。下面冷再生机出租厂家来讲讲冷再生机的优势以及正确的操作方式相关内容吧。

Cold recycling machine is a kind of machine commonly used in construction site operation, which can effectively help construction workers to speed up work efficiency and improve project quality. Next, let's talk about the advantages of the cold regenerator and the correct operation mode.

冷再生机的优势

Advantages of cold regenerator

1、施工工序简单化。

1. The construction process is simplified.

2、防止因道路施工而引起交通的堵塞。

2. Prevent traffic jam caused by road construction.

3、施工效率高。

3. High construction efficiency.

4、保护环境、节约能源和资源。

4. Protect the environment and save energy and resources.

5、降低施工成本。

5. Reduce construction costs.

冷再生机正确的操作方式

Correct operation mode of cold regenerator

1.使用后控制台时，需将开关拨到后控制，此时前控制台无作用，此外各个小喷头开关可以使用后控制台打开、关闭。

1. When using the rear console, you need to turn the switch to the rear control. At this time, the front console has no effect. In addition, each small nozzle switch can be turned on and off using the rear console.

2.乳化沥青设备不能灌的太满，加油口盖须关紧，运输过程中以防沥青溢出。

2. The emulsified asphalt equipment shall not be filled too full, and the filler cap shall be tightly closed to prevent asphalt overflow during transportation.

3.乳化沥青设备在喷洒前一定要检查各阀门位置是否正确。加入乳化沥青设备内的热态沥青须达到160~180℃的工作温度，长距离运输或工作时间过长，可使用加温装置保温，但不能当作熔油炉。

3. Before spraying, the emulsified asphalt equipment must check whether the position of each valve is correct. The hot asphalt added into the emulsified asphalt equipment must reach the working temperature of 160~180 ℃. If it is transported for a long distance or the working time is too long, the heating device can be used for insulation, but it cannot be used as an oil melting furnace.

以上就是关于冷再生机优势以及冷再机的正确操作方式的介绍，希望对大家有所帮助。如果您还有其他方面的问题或是疑问，欢迎咨询我们的在线http://www.tclqgc.com客服。

The above is about the advantages of the cold regenerator and the correct operation mode of the cold regenerator. I hope it will be helpful to you. If you have any other questions, please contact us online http://www.tclqgc.com customer service.