冷再生的工作宽度为3.8 m，再生深度在0-150 mm之间，配有708 KW高性能发动机，确保再生。该设备既能采用普通的铣刨工艺，冷再生机又能采用维特根研发的下切工艺进行施工。配上输送带后，用下切刨刨法所得的混合料，经后送后端的沥青摊铺机，并及时均匀摊铺。
The working width of cold regeneration is 3.8 m, the regeneration depth is between 0-150 mm, equipped with 708 KW high performance engine to ensure efficient regeneration. The equipment can be used for both conventional milling and regeneration using a cutting process developed by Wittgen. After the conveyor belt is fitted, the mixture obtained by the cutting and planing method is sent to the asphalt paver at the back end and evenly spread in time.

再生料宽度为3.8 m宽，可再生100 cm厚的沥青混凝土层，整个工作宽度一次无缝再生一条车道，施工效率极高，与其配套的摊铺机具有很大的材料输送能力，因此原路面材料的不均匀性得以，并可铺筑出良好的横断面

建筑下边作业大大优化了材料的级配。
The width of the reclaimed material is 3.8 m wide, and the Tarmac layer of 100 cm thick can be regenerated. The entire working width can be regenerated one lane at a time without any gap. The construction efficiency is extremely high, and the paver matched with it has great material conveying capacity, therefore, the non-uniformity of the original pavement material can be eliminated, and good cross-section can be paved under the building to greatly optimize the material gradation.

双作用：即既能作为后出料，又可用作高性能铣刨机。