冷再生施工和机械租赁业务
筑路架桥,奉献社会;以人为本,追求卓越

服务热线

18264104888

新闻中心

首页>>新闻中心>>冷再生机在解决道路全深度优势有哪些?

冷再生机在解决道路全深度优势有哪些?

来源:http://www.tclqgc.com/ 日期:2021-11-18 发布人:guanli
冷再生机是解决道路全深度翻新和土壤稳定的平台。冷再生机采用自动深度控制装置。负荷控制装置,使发动机的速度被保持在峰值扭矩,以维持高的产率。四种转向模式丰富的机移动性。有三个转子的选择:粉通用转子专用沥青层;切碎的功能和转子的两个组合的稳定性;和两个专用土壤稳定转子不同的土壤类型。
Cold regenerator is a platform to solve the full-depth renovation of roads and soil stability. The cold regenerator adopts automatic depth control device. The load control device keeps the engine speed at the peak torque to maintain high yield. Four steering modes enrich the mobility of the aircraft. There are three rotor options: powder general rotor special asphalt layer; The chopping function and the stability of the two combinations of the rotor; And two special soil stabilization rotors with different soil types.
道路冷再生工艺优势比就地冷再生技术的道路路面维修改造传统方法具有无可比拟的优势。
Compared with the traditional methods of road pavement maintenance and reconstruction with in-situ cold regeneration technology, the road cold regeneration technology has incomparable advantages.
1,成本低,根据海外引入的工程信息,与旧的层压材料新的覆盖方法相比,就地冷再生能的约20%的成本降低到46%。
冷再生机租赁
1. Low cost. According to the engineering information introduced overseas, the cost of in-situ cold regeneration energy is reduced from about 20% to 46% compared with the new covering method of old laminated materials.
2,提高老路的水平,我们可以提高基层的承载能力,改善道路,实现从根本上,这是低等级公路,特别是有特殊的含义。
2. To improve the level of the old road, we can improve the bearing capacity of the grass-roots level, improve the road, and fundamentally, this is a low-grade highway, especially with special meaning.
3,厚度均匀的结构完整性,从而导致冷回收店内层,有有时可见之间没有淡薄接口覆盖传统的施工方法。
3. The structural integrity with uniform thickness leads to the inner layer of the cold recycling store. Sometimes it can be seen that there is no thin interface between them to cover the traditional construction method.
4,路基无损伤,仅通过一次由于一次性冷再循环做法,在暴露的路基再生单元。与传统的施工方法,对路基的损伤较小相比。
4. The subgrade has no damage and only passes through the exposed subgrade regeneration unit once due to the one-time cold recycling practice. Compared with the traditional construction method, it has less damage to the subgrade.
5,节约材料,所有的旧料全部帘布本地使用,从而大大降低了新材料,以保护资源量。
5. Save materials. All old materials are used locally, so as to greatly reduce new materials and protect resources.
6,建设周期短,因为那里是老材料的任何运输问题,旧机器和目标上没有任何其他材料碎散,不需要专门的散装物料拆除和破碎,更重要的是,一次性操作的特点施工过程大大简化了施工工艺,节省了施工时间。
6. The construction period is short, because there is any transportation problem of old materials. There is no broken material on the old machine and target, and there is no need for special removal and crushing of bulk materials. More importantly, the characteristic of one-time operation greatly simplifies the construction process and saves the construction time.
7,冷再生保护环境,因为使用旧物大大降低新材料的开发,没有运输和堆放旧物的问题,以符合环保要求的根本。
7. Cold regeneration protects the environment, because the use of old things greatly reduces the development of new materials, and there is no problem of transporting and stacking old things, so as to meet the fundamental requirements of environmental protection.

推荐阅读/ Recommended reading

沥青的发泡特性:沥青在高温(一般为160℃左右)条件下,加入少量(2%左右)的水,由于水的急速气化,使沥青剧烈膨胀,发生爆炸产生大量泡沫

高速液压夯实机的安全操作方式 2022-01-10
XLZ250路面冷再生机机械自身特点 2022-01-07
冷再生材料级配对于机器的使用有影响吗? 2021-12-29
水稳冷再生技术的优缺点介绍 2021-12-25

推荐产品/ Recommended products