冷再生施工和机械租赁业务
筑路架桥,奉献社会;以人为本,不断创新

服务热线

18264104888

新闻中心

首页>>新闻中心路面冷再生机租赁的组成和工作原理!

路面冷再生机租赁的组成和工作原理!

来源:http://www.tclqgc.com/ 日期:2021-07-12 发布人:
随着城市化进程的加快,各地都开始大规模的拆迁和维修路面,路面维修就要用到路面冷再生机,大家一起来了解一下吧!
With the acceleration of the urbanization process, large-scale demolition and maintenance of the road surface have begun all over the country. The road surface maintenance will use the cold recycling machine. Let's get to know it!
一般来说,长期经受重型交通的路面会出现路基损坏的情况。为了这种损坏,需要对整个路面进行结构性维修。路面冷再生机将铣刨料全部进行重新利用,加之其经济的处理方式,使得采用泡沫沥青进行冷再生施工成为一种开创性解决方案,达到而经济的作用。
Generally speaking, the roadbed will be damaged on the road surface which has suffered heavy traffic for a long time. In order to eliminate this damage, it is necessary to carry out structural maintenance on the whole pavement. The road cold recycling machine reuses all the milling materials, and its economic treatment mode makes the cold recycling construction of foamed asphalt become a pioneering solution to achieve the environmental protection and economic role.
组成:路面冷再生机是沥青路面冷再生施工中的主要设备,一般由动力系统、传动系统、工作装置、喷洒系统和操纵控制系统组成。
Composition: pavement cold recycling machine is the main equipment in asphalt pavement cold recycling construction, which is generally composed of power system, transmission system, working device, spraying system and control system.
工作原理:路面冷再生机向前行进时,转子向上旋转铣刨原路面材料,同时,水通过软管从路面冷再生机连接的水车中输送过来,并在路面冷再生机的拌和仓中喷洒。水的输送量通过微处理器控制的泵送系统准确控制,以达到需要的含水量。铣刨转子将水与铣刨料充分拌和。
Working principle: when the road cold recycling machine moves forward, the rotor rotates upward to mill the raw road materials. At the same time, the water is transported from the water truck connected with the road cold recycling machine through the hose, and sprayed in the mixing bin of the road cold recycling machine. The water delivery quantity is accurately controlled by the pumping system controlled by the microprocessor to achieve the required water content. The milling rotor fully mixes the water with the milling material.
液体稳定剂,例如热沥青(冷再生机自带泡沫沥青发泡装置,可将热沥青加热到160-180°C,与少量水混合发泡)可通过专门设计的喷洒嘴被喷洒到拌和腔;粉状稳定剂如水泥需按设计添加量事先洒布在路面冷再生机前的路面上,路面冷再生机将粉状稳定剂与再生料和水一次性拌和。如遇再生层原级配不好的情况,可在再生前将所缺少的部分集料洒布在路面上,通过与旧料拌和来改善原路面材料的级配。
Liquid stabilizer, such as hot asphalt (cold recycling machine with foam asphalt foaming device, can heat asphalt to 160-180 degrees C, mixing with a small amount of water) can be sprayed to the mixing chamber through a specially designed spray nozzle. The powder stabilizer such as cement should be sprayed on the pavement in front of the cold recycling machine according to the design amount, and the cold recycling machine will mix the powder stabilizer with recycled materials and water at one time. If the original grading of the recycled layer is not good, the missing part of the aggregate can be sprinkled on the pavement before regeneration, and the gradation of the raw pavement materials can be improved by mixing with the old materials.

阅读/ Recommended reading

1. 准备工作:使用者需要对水泥撒布车进行检查和维护,确保其正常运行。包括检查机械部件是否完好,油液是否充足,车辆的操作系统是否正常等。1. Preparation work: ...

冷再生基层工程质量检测、控制及注意事项 2024-03-20
公路路面养护冷再生知识汇总 2024-03-17
公路路面养护冷再生的施工要点 2024-03-17
冷再生机的控制要点要注意什么? 2024-03-13

产品/ Recommended products