冷再生施工和机械租赁业务
筑路架桥,奉献社会;以人为本,不断创新

服务热线

18264104888

新闻中心

首页>>新闻中心冷再生机磨合期的使用注意事项

冷再生机磨合期的使用注意事项

来源:http://www.tclqgc.com/ 日期:2023-03-15 发布人:
冷再生机是一种利用压实各种建筑和筑路材料的工程设备,因为可以用于压实各种非粘性土壤、碎石、碎石混合料以及各种沥青混凝土而被广泛应用。那么该设备在磨合期都需要注意哪些问题呢?下面冷再生机租赁人员为您讲解:
The cold recycling machine is a kind of engineering equipment that uses to compact various building and road materials. It is widely used because it can be used to compact various non-cohesive soil, crushed stone, crushed stone mixture and various asphalt concrete. What problems should be paid attention to during the running-in period of the equipment? The following personnel will explain to you:
1、注意经常察看各仪表是否异常,如果发现异常应及时停下设备进行处理,在原因未找到、故障未前,不可以运行设备。
1. Pay attention to frequently check whether each instrument is abnormal. If any abnormality is found, stop the equipment in time to deal with it. Do not operate the equipment until the cause is found and the fault is eliminated.
2、坚持清理机器并及时调整、紧固松动的零部件,以防因松动而加剧零部件的磨损或导致零部件缺失。
2. Adhere to cleaning the machine and timely adjust and tighten the loose parts to prevent the wear of parts or the loss of parts due to the looseness.
3、注意冷再生机磨合期的工作负荷,磨合期内的工作负荷一般不能超过额定工作负荷的80%,并要安排合适的工作量,防止设备因为长时间持续作业而出现过热。
3. Pay attention to the working load during the running-in period of the cold regenerator. The working load during the running-in period shall not exceed 80% of the rated working load, and appropriate workload shall be arranged to prevent the equipment from overheating due to long-term continuous operation.
冷再生机租赁
4、磨合期停止,应对设备进行一次保养,同时注意油液的更换。
4. When the running-in period is stopped, the equipment should be maintained once and the oil should be replaced.
5、注意经常检查润滑油、液压油、冷却液、制动液以及燃油(水)位,并注意做好整机密封性的检查,检查中如果发现油水缺乏过多,应查明原因,同时,应做好各润滑点的润滑强化,建议在磨合期内,每次使用前都要进行润滑油的检查与添加。
5. Pay attention to check the lubricating oil, hydraulic oil, cooling fluid, brake fluid and fuel (water) level frequently, and pay attention to check the sealing of the whole machine. If there is too much oil and water in the inspection, find out the reason. At the same time, strengthen the lubrication of each lubricating point. It is recommended to check and add the lubricating oil before each use during the running-in period.
冷再生机在磨合期内使用保养的要求可归纳为:减轻负荷、注意检查、强化润滑。只要做到上述几点,就可以减少早期故障的发生,提高运行的与稳定性,延长设备的使用寿命。更多相关内容就来我们网站http://www.tclqgc.com咨询吧!
The requirements for the use and maintenance of the cold regenerator during the running-in period can be summarized as follows: reduce the load, pay attention to inspection and strengthen lubrication. As long as the above points are achieved, the occurrence of early failures can be reduced, the safety and stability of operation can be improved, and the service life of the equipment can be extended. Come to our website for more relevant content http://www.tclqgc.com Ask!

阅读/ Recommended reading

1. 准备工作:使用者需要对水泥撒布车进行检查和维护,确保其正常运行。包括检查机械部件是否完好,油液是否充足,车辆的操作系统是否正常等。1. Preparation work: ...

冷再生基层工程质量检测、控制及注意事项 2024-03-20
公路路面养护冷再生知识汇总 2024-03-17
公路路面养护冷再生的施工要点 2024-03-17
冷再生机的控制要点要注意什么? 2024-03-13

产品/ Recommended products