冷再生机器主要用于旧沥青路面的升级改造，即基层冷再生。还可用于公路、城市、道路、广场、码头、停车场等工程的基层、底基层稳定土现场就地拌和作业。

The cold regeneration machine is mainly used for the upgrading and reconstruction of the old asphalt pavement, that is, the cold regeneration of the base course. It can also be used for on-site mixing of base and subbase stabilized soil in highway, city, road, square, wharf, parking lot and other projects.

旧路面改造时，冷再生机租赁厂家建议先按一定比例预洒骨料和添加剂，然后冷再生机顶推水车，与冷再生机自身带的喷洒系统联合工作，给铣刨转子铣削拌和的骨料添加适量的水，其水量是可控制的。

During the reconstruction of the old pavement, the leasing manufacturer of the cold recycling machine suggested that the aggregates and additives should be pre-sprinkled in a certain proportion, and then the cold recycling machine should push the water truck to work together with the spray system of the cold recycling machine itself to add an appropriate amount of water to the aggregates milled and mixed by the milling rotor, and the water volume is controllable.

冷再生铣拌后的再生材料经过平地机整平，再由压路机将路面压实。视交通载荷的不同，再生层上可以作表面处理，或摊铺沥青面层或摊铺水泥混凝土面层。

The recycled material after cold recycling milling is leveled by a grader and then compacted by a roller. Depending on the traffic load, surface treatment can be carried out on the recycled layer, or asphalt pavement or cement concrete pavement can be paved.

特点：

characteristic:

1、行车驱动和铣拌装置的驱动均为全液压闭式传动；

1. The driving of the crane and the milling and mixing device are fully hydraulic closed transmission;

2、行走速度和铣拌转子转速均可以无极调速；

2. The traveling speed and milling rotor speed can be adjusted steplessly;

3、前后双桥驱动，全液压转向；

3. Front and rear double axle drive, full hydraulic steering;

4、铣拌转子的提升和下降，尾门的开启和关闭均为电磁阀组操纵；

4. The lifting and lowering of the milling rotor and the opening and closing of the tailgate are controlled by the solenoid valve group;

5、驾驶室采用密封式，带空调设备，大大地改善了驾驶员的工作环境；

5. The cab is sealed with air conditioning equipment, which greatly improves the driver's working environment;

6、本机前后轮驱动轮胎选用；

6. The front and rear wheel drive tyres of the machine are selected;

7、使用本机进行冷再生作业成本低，，施工速度快、工期短，对交通影响小、干扰少。

7. Using this machine for cold regeneration has low cost, environmental protection and energy conservation, fast construction speed, short construction period, small impact on traffic and little interference.

冷再生机器的用途作业流程以及特点相关内容就讲解到这里了，您有怎样的疑惑或者需求就来我们网站http://www.tclqgc.com进行咨询吧！

The purpose, operation process and characteristics of the cold recycling machine will be explained here. If you have any doubts or needs, please come to our website http://www.tclqgc.com Consult!