双钢轮压路机现在已经作为道路施工工程以及机械建设工程当中必不可少的一种机械工具。它方便了人们施工作业的效率及方便性。今天冷再生机租赁厂家为大家介绍下使用压路机的技巧介绍：

Double steel wheel roller has become an indispensable mechanical tool in road construction engineering and machinery construction engineering. It facilitates the efficiency and convenience of people's construction. Today, the cold regenerator rental manufacturer introduces the skills of using the roller:

双钢轮胶轮压路机操作规程：

Operating procedures for double steel wheel rubber tyred roller:

A、碾压遵循的原则

A. Principles for rolling

a、少量喷水，保持高温慢速，梯形重，分段碾压。

a. Spray a small amount of water, keep high temperature and slow speed, trapezoid weight, and roll in sections.

b、由路外侧（低侧）向分隔带方面碾压。

b. Rolling from the outside of the road (low side) to the central divider.

c、每个碾道与相邻碾道重1/2轮宽。

c. Each roller track and the adjacent roller track weigh 1 / 2 wheel width.

d、压路机不得在未压完或刚压完的路面上急刹车、急弯、调头、转向、换挡、严禁在未压完的沥青层上停机。

d. The road roller shall not brake, bend, turn around, turn, shift gears on the road surface that has not been compacted or has just been compacted. It is strictly prohibited to stop on the asphalt layer that has not been compacted.

e、振动压路机用振动压实，需停驶、前进或后返时，应先停振，再换挡。

e. The vibratory roller is used for vibration compaction. When it needs to stop, move forward or return, the vibration shall be stopped first and then the gear shall be changed.

B、碾压程序

B. Rolling procedure

沥青混合料各层的碾压成型分为初压、复压、终压三个阶段。

The rolling forming of each layer of asphalt mixture is divided into three stages: initial compaction, re compaction and final compaction.

a、初压。钢轮静压1遍主要为了增加沥青混合料的初始密度起稳定作用。

a. Initial pressure. The static pressure of steel wheel once is mainly used to increase the initial density of asphalt mixture and play a stabilizing role.

b、复压。AC料钢轮振动压4遍，胶轮压4遍主要解决压实问题。SMA料钢轮振动6遍，以压实为准表面有云点点。

b. Re pressing. The AC material is vibrated by steel wheel for 4 times and rubber wheel for 4 times to solve the compaction problem. The steel wheel of SMA material shall be vibrated for 6 times, subject to compaction, and there are cloud spots on the surface.

c、终压。钢轮静压2遍主要是压实中产生的轮迹，使表面平整度达到或超过要求值，碾压终了温度应不低于70℃。

c. Final pressure. The static pressing of steel wheel for two times is mainly to eliminate the wheel marks generated during compaction, so that the surface flatness reaches or exceeds the required value. The temperature at the end of rolling shall not be lower than 70 ℃.

d、沥青路面边缘压实时应先留下30cm左右不压，待两个压实阶段完成后再压，并多压1～2遍，靠路缘石处压路机压不到时，用振动夯补压。

d. When the asphalt pavement edge is compacted, about 30cm shall be left without compaction. After the two compaction stages are completed, it shall be compacted for 1-2 more times. When the roller near the curb is unable to compact, it shall be compacted by vibrating rammer.

在操作双钢轮压路机之前，一定要仔细的阅读机械说明书，大致的了解下说明书对机器的简要说明，这样可以让作业人员对其有一定的了解，也方便了作业人员对其上手的程度，明确建设目标和目标方向的生产建设。

Before operating the double steel wheel roller, it is necessary to carefully read the machine manual and roughly understand the brief description of the machine in the manual, so that the operators can have a certain understanding of the machine, and also facilitate the operators to understand the level of its operation, and clarify the construction objectives and the production construction in the target direction.

其次，为了充分的发挥双钢轮压路机的工作性能以及有事，操作员一定要尽可能的掌握其职业技能，在不同的作业环境发挥出的优势体现。

Secondly, in order to give full play to the working performance of the double steel wheel roller, the operators must master their professional skills as much as possible, and display their advantages in different working environments.

双钢轮压路机作为一种性能比较突出的机械设备，在进行作业的时候，一定要尽可能的维护和保养，以方便其尽可能的为道路工程贡献出作用，在后期不用的时候，要做好的保养措施，以便延长压路机的使用寿命。

As a kind of mechanical equipment with outstanding performance, the double steel wheel roller must be maintained as much as possible during operation to facilitate its contribution to the road project as much as possible. When it is not used in the later period, comprehensive maintenance measures should be taken to extend the service life of the roller.

压路机的操作说不上困难，但还是让技术较强的人员来操作，如果有新手学习驾驶，一定要有老师傅亲手提携为好，这样才能更大的发挥出它的优势。关注我们http://www.tclqgc.com，了解更多。

The operation of the road roller is not difficult, but it should be operated by skilled personnel. If there is a novice learning to drive, it is better to have the master hand-held, so as to give full play to its advantages. Follow us http://www.tclqgc.com Yes, learn more.