技术特点较之传统的道路维修改造方法，道路就地冷再生工艺有着无可比拟的诸多优点。下面就来讲讲问题的对应内容吧。

Compared with the traditional road maintenance and reconstruction methods, the road in situ cold regeneration process has many incomparable advantages. Now let's talk about the corresponding content of the problem.

1、成本低

1. Low cost

根据国外的施工资料介绍，与在旧铺层上加铺新料的方法相比，就地冷再生约可降低成本20%~46%。

According to foreign construction data, compared with the method of paving new materials on the old pavement, the cost of in-situ cold regeneration can be reduced by about 20% - 46%.

2、提高旧路等级

2. Improve the grade of old roads

可以通过基层承载力的提高从根本上实现道路等级的提高，这对低等级公路尤其有特殊意义。

The improvement of road grade can be fundamentally achieved through the improvement of base bearing capacity, which is of special significance for low-grade highways.

3、结构的完整性

3. Structural integrity

冷再生施工产生的均匀的较厚铺层内，不存在传统施工方法中有时出现的较薄铺层间的薄弱界面。

There is no weak interface between thinner pavements that sometimes appears in traditional construction methods in the even thicker pavements produced by cold regeneration construction.

4、不损坏路基

4. Do not damage the subgrade

由于冷再生施工为一次性作业方式，再生机组在暴露的路基上只通过一次。所以与传统施工方法相比，对路基的损害较小。

Because the cold regeneration construction is a one-time operation, the regeneration unit passes through the exposed subgrade only once. Therefore, compared with the traditional construction method, the damage to the subgrade is smaller.

5、节约材料

5. Save materials

所有旧铺层材料全部就地利用，从而大大减少了新材料的用量，保护了资源。

All old paving materials are used locally, which greatly reduces the consumption of new materials and protects resources.

6、工期短

6. Short construction period

冷再生机租赁人员认为由于不存在旧料的运输问题，不需要其他机械对旧料的靶松和破碎，不需要大块材料的去除和专门破碎，更重要的是施工过程的一次性作业特点大大简化了施工程序，从而节约了施工时间。

The leasing personnel of the cold recycling machine believe that since there is no transportation problem of old materials, there is no need for other machinery to loosen and crush the old materials, and there is no need for the removal and special crushing of large materials. More importantly, the one-time operation characteristics of the construction process greatly simplify the construction procedure, thus saving the construction time.

7、保护环境

7. Protect the environment

因为旧料的利用大大减少了新材料的开采量，也不存在旧料的运输和堆放问题。从根本上满足了环境保护的要求。

Because the utilization of old materials greatly reduces the mining volume of new materials, and there is no problem of transportation and stacking of old materials. It fundamentally meets the requirements of environmental protection.

此外为了更好的使用该设备工作，要求在平日中做好维修保养工作，更多相关内容就来我们网站http://www.tclqgc.com咨询吧。

In addition, in order to better use the equipment, it is required to do a good job of maintenance on weekdays. For more relevant content, please come to our website http://www.tclqgc.com Consult.